Skip to content

Ford V10 Oil Capacity: The Important Feature for Vehicle Specifications

Ford V10 Oil Capacity

When it comes to Ford car specifications, one of the most overlooked but crucial features is the Ford V10 oil capacity. That varies depending on the engine in your vehicle. Many engines require five to six quarts of oil, although a few small four-cylinder motors may require as little as four quarts. Larger engines, but on the other hand, can hold up to eight or nine quarts.

So many Ford models with a V10 engine have different specifications. Each of them has unique characteristics that distinguish them. As a result, the purpose of this blog is to provide you with information on each model of Ford V10 Oil Capacity. In the end, it will give you the suitable kind of Ford model that suits your needs. 

Ford Triton V10 Oil Capacity

Ford Motor Company’s Triton is a 6.8-liter normally aspirated V10 engine that powers heavy-duty trucks and cargo trucks like the Ford E-Series. The 6.8L V10 that resulted was a powerful engine. It was available in F-250 trucks and up, as well as vehicles and buses. Throughout manufacturing, the V10 would receive a variety of head models and block upgrades.

The Ford Triton V-10’s specifications are as follows:

  • V-10 engine with a displacement of 6.8 litres
  • Power ranges from 305 to 362 hp.
  • Torque ranges from 420 to 457 pound-feet.
  • Towing capacity of 12,000 pounds or more
  • MPG ranges from 14.5 to 15.0.

The Triton Ford V10 oil capacity tank holds 6 to 7 quarts. Some specialists believe that 6 is sufficient, whereas others believe 7 is necessary since it does not appear to fill it completely. 6 liters is enough, according to Ford. Above all, these specifications on oil capacity are the same when talking about ford v10 truck oil capacity.

2018 Ford V10 Oil Capacity

When it came to 2018 Ford designs, the F-150 was one of the most appealing. The 6.8-liter  V10 engine that was used in Ford’s Super Duty heavy-duty pickups is the highest in the series. The V10 is a turboprop with three valves per cylinder and a displacement of 6.8 liters (415 cubic inches).

At 4,750 revolutions per minute (rpm), the engine produces 362 horsepower and 457 foot-pounds of torque at 3,250 pm. The iron block and aluminum heads are used in this engine. The 2018 6.8 liters Ford V10 oil capacity is seven quarts, and the refrigerant capacity is 27.5 quarts.

Recommended Reading | Best Ford v10 Supercharger to Buy

2000 Ford Excursion V10 Oil Capacity

The Ford Excursion was a completely new SUV built on the F-250 Super Duty truck platform. The powertrain in the Excursion is a 5.4-liter V8 in 2-wheel-drive models and a 6.8-liter V10 in 4-wheel-drive models. All engines come equipped with a four-speed automatic gearbox; the Excursion does not offer a manual gearbox.

According to Ford’s private testing, the 5.4-liter V-8 receives 12 to 15 mpg, while the V-10 get 10 to 13 mpg. All the V-10 6.8L motors, as per my Ford specialized source, get a six-quart oil capacity with filtration change.

2004 Ford V10 Oil Capacity

2004 Ford V10 Oil Capacity

The 6.8L diesel fuel V-10 Triton engine found among most 2004 F-250 Super Duty pickups, and several famous travel trailer chassis is a signature style over-square engine. It’s a challenging 415ci engine with 310 hp and 425 lb.-ft of torque at the crankshaft in stock trim, and it adores to tow heavy cargo. It’s dependable and fuel-efficient. In short, the Ford V-10 is quite well, so any action you take should be good ones. The very next engines for the 2004 Ford F-250 all require 6 quarts of synthetic oil (5W20).

2015 Ford V10 Oil Capacity

2015 Ford V10 Oil Capacity

When you alter the filter and the 6.8 liters V10 simultaneously, you’ll need 7 quarts. Nevertheless, you may discover that your lorry runs best with regular oil and that you don’t need to switch to synthetic oils to keep your engine lubricated. Check your instruction booklet to see what type of engine oil the manufacturer recommends. This must be done whereas your truck or RV warranty is still in effect and protecting you.

Oil filter for Ford V10 Triton Large Capacity

Like the oil maintains your motor clean, the oil filter helps eliminate contaminants that can cause extensive damage to the oil. It’s crucial to have clean lubricating oil because if you don’t filter it, it can become swamped with tiny, wear debris that really can wear down your car’s surfaces.

However, various oil filters are available for multiple car manufacturers, including V10 oil filters. Motorcraft filters are designed to meet Ford’s standards and are suggested by Ford as a substitute filter for Ford’s original parts. The key is finding a filter that meets the technical standards of 20-micron atoms. Its most harm and wear are caused by atoms in the 10-20 μm range.

FAQs on Ford V10 Oil Capacity

What is the oil capacity for a 2004 ford f250 with a v10?

It’s best to follow the manufacturer’s instructions, and when changing your filter, you’ll need 7 quarts of gas to fill up the tank. Alternatively, 6-6.5 quarts are the best choice.

What is the oil capacity for a 1999 ford v10 in a pace arrow?

During such oil change, utilize 6 quarts of gas (including filter change). It is suggested that you use 5W-20 motor oil.

What is the ford e450 v10 oil capacity?

The 2016 ford e450 has 6 quarts of 5W-30 synthetic oil, while on the other hand, the 2021 Ford e450 has 5 quarts of 5w-30 synthetic oil.

Is it essential to alter the petroleum in my Ford V10 regularly?

The oil service period is usually 7,500 miles or six months on relatively new Tritons. A 3,000 to  5,000-mile delay time was used in old cars with this motor.

How far will the Ford V10 take you?

The Ford V10 is well-known for its dependability. If the motor has been adequately maintained during its life, it should last at least 200,000 miles before actually requiring any significant repairs.

Ford V10 Oil Capacity The Important Feature for Vehicle Specifications


Recognizing the Ford V10 oil capacity can hold will help you keep it going continuously. It will also aid your engine’s performance, allowing you to save some gas in the long term. Always read and follow your manufacturer’s guidelines to keep your vehicle’s engine fit and fine.

Leave a Reply

Your email address will not be published. Required fields are marked *