2013 Ford Escape Transmission fluid is a special requirement for the smooth working of the vehicle. Making sure the transmission fluid is at the right level and in excellent shape is a crucial part of maintenance. It is essential to use proper oil as per the specifications in the manual because using a different one can lead to gearshift issues, engine damage, and additional issues.
The transmission, responsible for transmitting power from the engine to the wheels, is a vital component. Without routine maintenance of the transmission oil, the transmission can be damaged and require expensive repairs. In this guide, we’ll go into more detail about the 2013 Ford Escape transmission fluid specifications and provide tips for checking and replacing the fluid.
2013 Ford Escape Transmission Fluid Type
The 2013 Ford Escape is a small SUV that requires a specific type of transmission fluid to function optimally. Motorcraft Mercon LV Automatic Transmission Fluid is the recommended transmission fluid grade for this vehicle. This fluid is designed to provide increased thermal stability, better wear protection and smooth shifting. To ensure proper transmission operation, it is also advisable to use only fluids that meet Ford’s Mercon LV standard.
The transmission must be routinely serviced and replaced to remain in good condition and avoid costly repairs. Depending on driving conditions, it is recommended that transmission fluid be changed every 30,000 to 60,000 miles. Specific maintenance schedules and recommendations for your vehicle can always be found in the owner’s manual.
2013 Ford Escape Transmission Fluid Location and Capacity
The transmission oil for the 2013 Ford Escape is kept inside the transmission itself. Spot transmission dipstick, which is usually found close to the rear of the engine area, for inspection and add fluid. Add the right kind of transmission fluid if the amount is low until it is at the right level.
The 2013 Ford Escape has a different transmission fluid capacity, depending on the gearbox type. The 6-speed automatic gearbox has a total capacity of about 9.2 quarts, compared to about 2.5 quarts for manual transmission. It’s crucial to consult the owner’s manual or a dependable mechanic to make sure the right quantity of fluid is used.
2013 Ford Escape Transmission Fluid: Problems
A 2013 Ford Escape with gearbox fluid issues may experience a number of problems, such as sluggish shifting, slipping, and gearbox failure.
- Fluid Leakage: Fluid leakage is among the most prevalent transmission fluid issues. Leaks can be caused by a cracked transmission housing, a worn-out seal, or harm to the transmission pan.
- Overheating: The transmission fluid can degrade and lose its capacity for cleaning and cooling the gearbox if it overheats.
- Fluid Contamination: Dust, detritus, and scrap metal can accumulate in transmission fluid over time.
- Wrong fluid type: Using an improper transmission oil can also result in issues. Poor moving and transmission malfunction can result from using the incorrect kind of fluid.
The lifespan of your vehicle’s gearbox can be increased by performing routine maintenance, which includes fluid changes.
How to Properly Dispose of Used 2013 Ford Escape Transmission Fluid?
Any engine’s transmission mechanism must include the transmission fluid. It is in charge of greasing and freezing the transmission’s moving components, and if left untreated, it can deteriorate or become contaminated over time, harming the transmission. We’ll walk you through changing the transmission’s fluid in a 2013 Ford Escape in this post.
- Compile the required supplies: You’ll need a new transmission filter, a fresh transmission pan gasket, the drain pan, a socket wrench, a funnel, and a fresh bottle of fluid that complies with Ford’s requirements in order to change the oil.
- Locate the gearbox pan and discharge plug: A number of bolts secure the transmission pan, which is situated on the transmission’s bottom. The drain plug, which is used to empty the old fluid, is usually found at the pan’s bottom.
- Drain the previous liquids and remove the pan and oil filter: use a socket tool to remove the drain plug and the gasket.
- Replace the gasket and transmission cleaner: Replace the gearbox filter and sealant with fresh ones after removing the old ones. Before reconnecting the transmission pan, check that the new filter and gasket are correctly positioned.
- Add fresh oil to the gearbox: Pour the new transmission fluid with the help of a dipstick. Check the levels using a probe and adjust the fluid, if needed.
How to Reset the 2013 Ford Escape Transmission Fluid Maintenance Light?
Your 2013 Ford Escape’s transmission fluid maintenance light is intended to notify you when the transmission fluid needs to be changed. Here’s a guide on how to restart the light after changing the fluid.
- Turn the ignition key to the on position, but do not start the engine.
- For 10 seconds, depress and hold down the gas pedal.
- Turn off the ignition and let off the gas pedal.
- Restart the ignition and look to see if the maintenance light for the transmission fluid has been reset.
The 2013 Ford Escape’s transmission fluid maintenance light may be quickly and simply reset, which can assist to ensure that your car is kept up to date.
2013 Ford Escape Transmission Fluid Cost
A few transmission problems with the Ford Escape in 2013 led to some drivers needing to change the transmission fluid more often than expected. Owners of the car had to pay more as a result. On average, a complete transmission fluid replacement can run you between $100 and $200. However, the cost of the fluid can change respectively on the kind of service given to your 2013 Ford Escape.
FAQs on 2013 Ford Escape Transmission Fluid
How often should I change the transmission fluid in my 2013 Ford Escape?
For the 2013 Ford Escape, Ford advises replacing the transmission fluid every 150,000 kilometers. However, it is wise to check the fluid level frequently.
I have a 2013 Ford Escape. Can I use any brand of transmission fluid?
No, you must use the right kind of transmission oil for your car.
Can I perform a manual transmission fluid replacement on my 2013 Ford Escape?
You can perform a manual transmission fluid replacement on your 2013 Ford Escape. To prevent transmission damage, it is crucial to adhere to the proper method and use the right kind of transmission fluid.
Is it necessary to flush the transmission fluid on a 2013 Ford Escape?
A 2013 Ford Escape’s transmission should be flushed as the manufacturer instructs to guarantee optimum performance and transmission longevity.
Can I use a generic transmission fluid on my 2013 Ford Escape?
It is not appreciated to use any generic kind of transmission fluid other than the specifications of the fluid mentioned in the manual of the vehicle.
Is it possible to overfill the transmission fluid on a 2013 Ford Escape?
On a 2013 Ford Escape, it is possible to overfill the transmission fluid. Overfilling may result in excessive pressure, transmission damage, and expensive repairs.
In particular, for the 2013 Ford Escape, maintaining appropriate transmission fluid amounts and quality is a crucial part of vehicle maintenance. Using the right kind of transmission fluid, replacing it frequently, and keeping an eye on the fluid’s condition and purity can help keep your car operating smoothly and avoid transmission damage. You can extend the life of your 2013 Ford Escape transmission fluid by keeping up with routine upkeep.